GR-RX3S-03

 

The Quanum Gyro is a flight stabilization system for rc planes. It has independent gyro gain control for aileron， elevator and rudder.
This gyro stabilizer will smooth out these 3 controls and make your model easier and much smoother to fly， especially in rough air conditions.
There are three modes that the plane can fly in， manual (gyro and accelerometer are off)， stabilized (gyro is on， accelerometer is off)， self-stabilized (gyro and accelerometer are on).
These can be selected from your controller.
There is even a rescue or save mode. This will (in most circumstances) bring your plane back to level flight (if you are not too close to the ground) if you lose control.
This is activated by a switch on your controller.
This unit would be perfect in a Trainer type model for beginners to RC flying or for making any model more stable and easier to fly.

Features:
　• Rescue switch (one key stabilizing)
　• Supports 3 model types， normal， delta wing and v-tail
　• Three flight modes manual / stabilization / self-stabilization
　• Independent Axis Gain
　• Configurable Gain for comfortable/sensitive control response

Specs:
　Voltage Range: 5V
　Controllable channels: 3CH
　Mode: Manual / Stabilization / Self-stabilization
　Supported airplanes: Normal / Flying wing / V-tail
　Dimensions: 38 x 28.5 x 13mm
　Weight: 7.4g

Included:
　1 x Gyro
　1 x Double sided tape
　6 x Connection Cables